• About
    • Core Values
    • ISO Certification
    • Testimonials
  • Brands
    • Stauff
    • RFS Hydraulics
    • MHA-Zentgraf
    • Eaton Walterscheid
    • AF Hydro
    • Oleo-Tecnica
    • KPL Industry
    • Bothwell
    • Inteva
  • Products
    • Pipes and Tubes >
      • Stainless Steel Tubes
      • Stainless Steel Pipes
      • Hydraulic Steel Tubes
      • Copper Tubes
      • Copper Coils
      • Walform Tubes
    • Clamps >
      • Stauff Clamps
      • Tube Clamps
      • Stauff ACT Clamps
      • Rubber Insert Clamps
    • Flanges >
      • SAE Flange
      • Square Flanges
    • High Pressure Fittings >
      • Hydraulic Compression Fittings
      • Forged Pipe Fittings
      • JIC Fittings
      • Twin / Double Ferrule Fittings
      • Quick Connect Couplings
      • Adapter Fittings
    • High Pressure Valves >
      • High Pressure Ball Valves
      • High Pressure Check Valves
      • Needle Valves
      • SAE Flange Ball Valves
      • SAE Flange Check Valves
      • ISO6164 Ball Valve
    • Low Pressure Valves >
      • Low Pressure Ball Valves >
        • 1 PC Ball Valve
        • 2 PC Ball Valve
        • 3 PC Ball Valve
        • 3 Way L-Port Ball Valve
        • 3 Way T-Port Ball Valve
        • Brass Ball Valve
        • Brass Mini Ball Valve
        • Stainless Steel Mini Ball Valve
      • Flange End Ball Valves >
        • PN10/16 SS316 Flange End Ball Valve
        • ANSI 150# SS316 Flange End Ball Valve
        • ANSI 300# SS316 Flange End Ball Valve
        • JIS 10K SS316 Flange End Ball Valve
        • ANSI 150# Cast Steel Flange End Ball Valve
        • ANSI 300# Cast Steel Flange End Ball Valve
      • Swing Check Valves >
        • ANSI 150# SS316 Flange End Swing Check Valve
        • JIS 10K SS316 Flange End Swing Check Valve
        • ANSI 150# Cast Steel Flange End Swing Check Valve
        • Threaded End SS316 Swing Check Valve
        • Threaded End Brass Swing Check Valve
      • Single Plate Check Valve
      • Dual Plate Check Valve
      • Spring Check Valve
      • Y-strainers >
        • ANSI 150# SS316 Flange End Y-Strainers
        • JIS 10K SS316 Flange End Y-Strainers
        • Threaded End SS316 Y-Strainers
        • ANSI 150# Cast Steel Flange End Y-Strainers
        • JIS 10K Cast Steel Flange End Y-Strainers
      • Gate Valves >
        • ANSI 150# SS316 Flange End Gate Valve
        • JIS 10K SS316 Flange End Gate Valve
        • Threaded End SS316 Gate Valve 200PSI
        • Threaded End SS316 Gate Valve 800PSI
        • ANSI 150# Cast Iron Flange End Gate Valve
        • JIS 10K Cast Iron Flange End Gate Valve
        • ANSI 150# Cast Steel Flange End Gate Valve
        • ANSI 150# Forged Steel Flange End Gate Valve
        • Threaded End Forged Steel Gate Valve
        • Welded End Forged Steel Gate Valve
      • Globe Valves >
        • ANSI 150# SS316 Flange End Globe Valve
        • JIS 10K SS316 Flange End Globe Valve
        • Threaded End SS316 Globe Valve 200PSI
        • Threaded End SS316 Globe Valve 800PSI
        • ANSI 150# Cast Iron Flange End Globe Valve
        • JIS 10K Cast Iron Flange End Globe Valve
        • ANSI 150# Cast Steel Flange End Globe Valve
        • ANSI 150# Forged Steel Flange End Globe Valve
        • Threaded End Forged Steel Globe Valve
        • Welded End Forged Steel Globe Valve
      • Butterfly Valves >
        • ANSI 150# Cast Iron Wafer Type Butterfly Valve
        • ANSI 150# Cast Iron Lug Type Butterfly Valve
    • Low Pressure Fittings >
      • Class 150# Fittings
      • Camlock Fittings
    • Accessories >
      • Stauff Pressure Gauges
      • Stauff Test Couplings
      • Stauff Tube Cleaning Systems
      • Stauff Level Gauges
      • Stauff Filler Breathers
      • Eaton Walterscheid Walform Machine
      • Eaton Walterscheid Anti Bloc Fett/Grease
      • Eaton Walterscheid Walform Seal
      • GS Hydro Retain Ring
      • GS Hydro Bonded Seals
      • O-Rings
      • Dowty Seals
  • MyRewards
    • BENEFITS
    • MyFAQ
    • Sign-up MyRewards
  • Catalogues
    • Pipes and Tubes
    • Clamps
    • Flanges
    • High Pressure Valves
    • High Pressure Fittings
    • Low Pressure Valves
    • Low Pressure Fittings
    • Accessories
  • News
  • Contact
CHUAN KOK
  • About
    • Core Values
    • ISO Certification
    • Testimonials
  • Brands
    • Stauff
    • RFS Hydraulics
    • MHA-Zentgraf
    • Eaton Walterscheid
    • AF Hydro
    • Oleo-Tecnica
    • KPL Industry
    • Bothwell
    • Inteva
  • Products
    • Pipes and Tubes >
      • Stainless Steel Tubes
      • Stainless Steel Pipes
      • Hydraulic Steel Tubes
      • Copper Tubes
      • Copper Coils
      • Walform Tubes
    • Clamps >
      • Stauff Clamps
      • Tube Clamps
      • Stauff ACT Clamps
      • Rubber Insert Clamps
    • Flanges >
      • SAE Flange
      • Square Flanges
    • High Pressure Fittings >
      • Hydraulic Compression Fittings
      • Forged Pipe Fittings
      • JIC Fittings
      • Twin / Double Ferrule Fittings
      • Quick Connect Couplings
      • Adapter Fittings
    • High Pressure Valves >
      • High Pressure Ball Valves
      • High Pressure Check Valves
      • Needle Valves
      • SAE Flange Ball Valves
      • SAE Flange Check Valves
      • ISO6164 Ball Valve
    • Low Pressure Valves >
      • Low Pressure Ball Valves >
        • 1 PC Ball Valve
        • 2 PC Ball Valve
        • 3 PC Ball Valve
        • 3 Way L-Port Ball Valve
        • 3 Way T-Port Ball Valve
        • Brass Ball Valve
        • Brass Mini Ball Valve
        • Stainless Steel Mini Ball Valve
      • Flange End Ball Valves >
        • PN10/16 SS316 Flange End Ball Valve
        • ANSI 150# SS316 Flange End Ball Valve
        • ANSI 300# SS316 Flange End Ball Valve
        • JIS 10K SS316 Flange End Ball Valve
        • ANSI 150# Cast Steel Flange End Ball Valve
        • ANSI 300# Cast Steel Flange End Ball Valve
      • Swing Check Valves >
        • ANSI 150# SS316 Flange End Swing Check Valve
        • JIS 10K SS316 Flange End Swing Check Valve
        • ANSI 150# Cast Steel Flange End Swing Check Valve
        • Threaded End SS316 Swing Check Valve
        • Threaded End Brass Swing Check Valve
      • Single Plate Check Valve
      • Dual Plate Check Valve
      • Spring Check Valve
      • Y-strainers >
        • ANSI 150# SS316 Flange End Y-Strainers
        • JIS 10K SS316 Flange End Y-Strainers
        • Threaded End SS316 Y-Strainers
        • ANSI 150# Cast Steel Flange End Y-Strainers
        • JIS 10K Cast Steel Flange End Y-Strainers
      • Gate Valves >
        • ANSI 150# SS316 Flange End Gate Valve
        • JIS 10K SS316 Flange End Gate Valve
        • Threaded End SS316 Gate Valve 200PSI
        • Threaded End SS316 Gate Valve 800PSI
        • ANSI 150# Cast Iron Flange End Gate Valve
        • JIS 10K Cast Iron Flange End Gate Valve
        • ANSI 150# Cast Steel Flange End Gate Valve
        • ANSI 150# Forged Steel Flange End Gate Valve
        • Threaded End Forged Steel Gate Valve
        • Welded End Forged Steel Gate Valve
      • Globe Valves >
        • ANSI 150# SS316 Flange End Globe Valve
        • JIS 10K SS316 Flange End Globe Valve
        • Threaded End SS316 Globe Valve 200PSI
        • Threaded End SS316 Globe Valve 800PSI
        • ANSI 150# Cast Iron Flange End Globe Valve
        • JIS 10K Cast Iron Flange End Globe Valve
        • ANSI 150# Cast Steel Flange End Globe Valve
        • ANSI 150# Forged Steel Flange End Globe Valve
        • Threaded End Forged Steel Globe Valve
        • Welded End Forged Steel Globe Valve
      • Butterfly Valves >
        • ANSI 150# Cast Iron Wafer Type Butterfly Valve
        • ANSI 150# Cast Iron Lug Type Butterfly Valve
    • Low Pressure Fittings >
      • Class 150# Fittings
      • Camlock Fittings
    • Accessories >
      • Stauff Pressure Gauges
      • Stauff Test Couplings
      • Stauff Tube Cleaning Systems
      • Stauff Level Gauges
      • Stauff Filler Breathers
      • Eaton Walterscheid Walform Machine
      • Eaton Walterscheid Anti Bloc Fett/Grease
      • Eaton Walterscheid Walform Seal
      • GS Hydro Retain Ring
      • GS Hydro Bonded Seals
      • O-Rings
      • Dowty Seals
  • MyRewards
    • BENEFITS
    • MyFAQ
    • Sign-up MyRewards
  • Catalogues
    • Pipes and Tubes
    • Clamps
    • Flanges
    • High Pressure Valves
    • High Pressure Fittings
    • Low Pressure Valves
    • Low Pressure Fittings
    • Accessories
  • News
  • Contact

EATON WALTERSCHEID WALFORM MACHINE

Description:
Eaton Walterscheid Walform Machine is an electronically controlled cold reshaping machine that handles cold reshaping of hydraulic steel & stainless steel tubes with outside diameters from 6 to 42 mm. This is usually used to provide high consistency for leak-free connections.

Walform Machine is available for sale or hire. For further information, please contact us at https://chuankok.wasap.my/.
Tube Diameters
  • 6MM - 42MM
Wall Thickness
  • 3MM - 6MM
Fittings Pressure Range
  • 250 BAR to 800 BAR
Brand:
Picture
EATON
Picture

Catalogue:
Walterscheid Walform Machine
Vertical Divider
Literature:
Eaton Walterscheid Walform Machine
Having difficulties looking for Eaton Waltersheid Walform Machine? ​We can help you because we have all sizes.
CONTACT US NOW!

Product Information of Eaton Waltersheid Walform Machine

1. Technical Data of Hydraulic Connections:
Walform Machine for HIRE
Hire Rates for WALFORM Machine:
2 Weeks
SGD 3,000
Per Month
SGD 6,000
Hire Rates for Clamping Jaw & Reshaper  (Per Set):
​2 Weeks
SGD 500
Per Month
SGD 1,000
​*Minimum rental period is 2 weeks.
*A security deposit of SGD 12,000; equivalent to 2 months’ rent is required for all rental.
Terms and conditions under Equipment Rental Contract applies.
A copy of Equipment Rental Contract is available upon request of quotation.

Complete range of Hydraulic Steel, Stainless Steel SS316 tubes and fittings also available.
Walform Machine for SALE
Technical Data of Walform Machine:
Weight
244 KG
Depth
99.0 CM
Width
85.0 CM
(Without handles 67.5 CM)
Height
26.0 CM
Voltage
400 V / 50 Hz
Fuse
16 A
Noise Level
<70 dBA
Power Consumption
2.8 kW
Hydraulics Design
2 - Stage Pump
​Oil
HLP-D 32
Quantity
5 Liters
​Pressure
Max. 600 BAR
​*Note: Technical Data are subject to changes.

2. What is a Walform Machine?

Walform machine is a portable tube reshaping machine used in a walform plus tube fitting system that produces  high quality tube connections. The Walform cold reshaping machine creates a profile ring in the tube itself  resulting in the recognized pressure point felt during in service assembly.

The only possible leakage path is primarily sealed off by the tried-and-tested WALFORMplus captive seal and  secondarily by the metallic seal between the patented WALFORMplus shoulder and the fitting body.

Eaton Walterscheid Walform Machine MEG-WF385X
Eaton Walterscheid Walform Machine MEG-WF385X
3. What are the advantage of WALFORMplus fitting system?
​

  • Simple and practical assembly process can be carried out by anyone.
  • Small number of components reduces material and logistics costs.
  • The system guarantees reliable tube retention, even under high dynamic loads.
  • Large volume of high quality assemblies can be efficiently produce​.

4. What is DIN 2353 and what are the applications of these tube fittings?

DIN 2353 fittings are a range of metric tube fittings made in accordance to ISO 8434-1 standards. They are also known as "Compression-Joint", or "Bite-Type" fittings as the profile ring in the fitting "bites" onto the tube to create the connection. These fittings are used to connect hydraulic tubes together to form a hydraulic line that allows fluid to flow through at high pressures. A simple hydraulic line in a vessel or an oil rig can easily comprises of up to hundreds & thousands of DIN 2353 fittings.

5. What is the current process for conventional tube fittings and what are the risks involved?

​Under the conventional method of connecting tubes using DIN 2353 fittings, the profile ring cuts into the surface of the tube and reshapes it when the nut is tightened. This in turns create a groove for the fitting to grip onto the tube. There are two points to note here. Firstly, this procedure can only be performed by trained workmen who have undergone a course on assembly and alignment of DIN 2353 fittings.
​
Secondly, it is more suitable for low volume production, repair works, and in environments whereby there is no power supply being made available. Having said so, there are still risks involved because the process is prone to human errors. During the tightening process, the workmen can over or under tighten the nuts and when this happens, it can lead to leakages which can pose serious dangers under high pressure. Leakages can lead to slip and fall hazards, fire danger, as well as contamination of the environment. Even a pinhole leak can release hydraulic fluid that is enough to penetrate both clothing and skin. The danger it can bring is definitely life threatening. ​

6. What are the benefits of replacing the current process with walform machine?​

With the use of a walform machine, the tubes get reshaped by simply inserting the tube into the configured walform machine, creating a profile ring in the tube itself. A Viton seal acts as the leakage block and tubes can be connected easily just by tightening the nut. With these in place, there is consistency and quality control over all the tubes, making them more reliable and safer than before. The risks that stem from improper assembly of the tubes as mentioned earlier can be reduced dramatically, creating a safer working environment.

Businesses can also save on manpower costs with the use of walform machines since it only requires one man to operate one machine. Lesser time is also required to configure a tube and this means that businesses can now handle larger volumes instead of being restricted by the use of the conventional method.

On top of all these, the assembly using a walform machine can be repeated multiple times and yet remain intact unlike the conventional method whereby the tube fittings can be damaged by over tightening. This reduces wastage as well as costs of replacing the tube fittings that are damaged in the process.

Furthermore, the use of the walform machine is simple and can be carried out by anyone; businesses need not send their workmen for such training in the future. This reduces the costs of business.​
Reshaped Tube
Reshaped Tube

7. How does the equipment increase or enhance productivity of the business (for example in terms of reduced man-hours, more output or improved work processes)?​

The process of reshaping a tube is made simpler with the shift from manual method to partial machine method. The only thing the workmen need to do is to insert the tube into the configured walform machine.

With the risks of leakages being reduced by the use of a walform machine, the performance efficiency can be improved which in turn improves the overall effectiveness of the equipment. This is because in hydraulic machinery, the primary cause of reduced performance efficiency is often caused by internal or external fluid leakages. Businesses can also avoid purchasing new equipments and tubes prematurely. The life cycle of the equipment and tubes can be extended significantly hence, reducing unnecessary expenses.

The time required to reshape a tube using the walform machine is 5 to 8 seconds versus the manual method at approximately 1 minute. Businesses save approximately 52 seconds to 55 seconds for each tube connection and this transform to 6 to 11 more tube connections than the manual method for each minute. Thus, the overall productivity and output increases.
​
Last but not least, businesses do not need as many workmen since only one man is required to operate one machine. Given that more tubes can be produced with lesser manpower, man-hours is reduced substantially too.

8. How to use a Walform Machine?​
Step 1: Prepare the Tubes
  • ​Tube grade suitable for cold-bending and flaring is to be used, pursuant to DIN 1630, Type NBK-3.1 B, material ST 37.4 (E235N).  Please make sure tube tolerances are to DIN 2391, Part C. Tolerances to DIN 2462, Part 1, result in problems with clamping and fitting. Tubes made of stainless steel (e.g. 1.4571) must be cold-drawn seamless and scale-free heat-treated, Form m to DIN 17458 and tolerances to DIN 2391, Sheet 
Step 2: Start-up
  • To open the tool holder remove the unlocking pin. Turn both tool holder handles anti clock-wise. Pull tool holder handles and move aside. (attention: risk of clamping) Insert clamping jaw with minor pressure into the tool holder up to a noticeable catch. Fix reshaping stud handtide using the assembly stud.

  • Close the toolholder. Swing the toolholder back into position and slide the toolholder back into its mount. Pull out the unlocking pin and turn both toolholder handles clockwise until the unlocking pin engages again.
Walform machine tool holder
Walform machine tool holder
Step 3: Series assembly
  • ​Insert the tools  and close the toolholder. The red fault indicator lamp goes out.
  • Press the start key. The machine is in its basic position. This procedure must also be repeated after every tool change.
  • Press the start key and function key simultaneously and hold down for approx. 2 sec. The ready indicator (white indicator lamp) lights up. The clamping jaws move to the insertion position.
  • Slide the nut onto the tube and insert the tube horizontally up to the stop and hold it tight!
  • Press the start key. The procedure runs automatically and cannot be interrupted. Tube has to be firmly fixed during the process. Remove the reshaped tube.
  • Examine the reshaped tube for detectable quality defects, e.g. surface damage, spalling, cracks, etc.
  • Check the control diameter
Walform Machine Controls
Walform Machine Controls

Product Catalogue in pdf:
Eaton Walterscheid Walform Machine Catalogue
Walterscheid
Walform Machine 
Product Literature in pdf:
Eaton Walterscheid Walform Machine Literature
Eaton Walterscheid Walform Machine
User Manual in pdf:
Walform Machine MEG-WF385X
Walform Machine ​MEG-WF385X
Walform Machine MEG-WF385X/BO
​Walform Machine MEG-WF385X/BO

​​To go back to Accessories page
accessories

FAQ Of Eaton Walterscheid Walform Machine

What is the function of Walform machine?
The function of Walform machine is to assemble compression fittings and tubes. It forms a profile ring in the tube body and resulting in the recognized pressure point felt during tube assembly.
​What is the brand of Walform machine?
​The brand of Walform machine is Eaton.
​How many components does Walform machine consists?
Mechanically reshaped tube end, DIN fitting body, DIN union nut, and Viton Walform seal are the four components that make up the Walform system.
​What are the features of Walform machine?
It has a high axial strength profile ring with radial flexibility, two edge cutting rings, and meets the DIN 2353 standard requirement for fitting.
What are the advantages of using a Walform machine to replace the current process?
The tubes are reshaped using a Walform machine by simply inserting the tube into the configured Walform machine, which creates a profile ring in the tube itself. It saves time and manpower cost since it only requires one man to operate one machine.
​Is Walform machine portable?
​Yes. Walform machine is portable type form factor that easy to carry in different job site.
Clients who viewed this product also:
DIN FIttings
DIN Fittings
Twin Ferrule Fittings
Twin Ferrule Fittings
Pipe Clamps
Stauff Clamps
High Pressure Ball Valves
High Pressure Ball Valves
Company
About Us
​
ISO Certification
​
Testimonials
​
News
​Contact Us
​Quick Links
Brands
Products
MyRewards
​Catalogues
​
Literature
​
FAQ
Legal Information
Terms & Conditions
​
Privacy Policy
Subscribe to Chuan Kok Newsletter
 © 2024 Chuan Kok Hardware & Machinery Pte Ltd. All rights reserved.
  • About
    • Core Values
    • ISO Certification
    • Testimonials
  • Brands
    • Stauff
    • RFS Hydraulics
    • MHA-Zentgraf
    • Eaton Walterscheid
    • AF Hydro
    • Oleo-Tecnica
    • KPL Industry
    • Bothwell
    • Inteva
  • Products
    • Pipes and Tubes >
      • Stainless Steel Tubes
      • Stainless Steel Pipes
      • Hydraulic Steel Tubes
      • Copper Tubes
      • Copper Coils
      • Walform Tubes
    • Clamps >
      • Stauff Clamps
      • Tube Clamps
      • Stauff ACT Clamps
      • Rubber Insert Clamps
    • Flanges >
      • SAE Flange
      • Square Flanges
    • High Pressure Fittings >
      • Hydraulic Compression Fittings
      • Forged Pipe Fittings
      • JIC Fittings
      • Twin / Double Ferrule Fittings
      • Quick Connect Couplings
      • Adapter Fittings
    • High Pressure Valves >
      • High Pressure Ball Valves
      • High Pressure Check Valves
      • Needle Valves
      • SAE Flange Ball Valves
      • SAE Flange Check Valves
      • ISO6164 Ball Valve
    • Low Pressure Valves >
      • Low Pressure Ball Valves >
        • 1 PC Ball Valve
        • 2 PC Ball Valve
        • 3 PC Ball Valve
        • 3 Way L-Port Ball Valve
        • 3 Way T-Port Ball Valve
        • Brass Ball Valve
        • Brass Mini Ball Valve
        • Stainless Steel Mini Ball Valve
      • Flange End Ball Valves >
        • PN10/16 SS316 Flange End Ball Valve
        • ANSI 150# SS316 Flange End Ball Valve
        • ANSI 300# SS316 Flange End Ball Valve
        • JIS 10K SS316 Flange End Ball Valve
        • ANSI 150# Cast Steel Flange End Ball Valve
        • ANSI 300# Cast Steel Flange End Ball Valve
      • Swing Check Valves >
        • ANSI 150# SS316 Flange End Swing Check Valve
        • JIS 10K SS316 Flange End Swing Check Valve
        • ANSI 150# Cast Steel Flange End Swing Check Valve
        • Threaded End SS316 Swing Check Valve
        • Threaded End Brass Swing Check Valve
      • Single Plate Check Valve
      • Dual Plate Check Valve
      • Spring Check Valve
      • Y-strainers >
        • ANSI 150# SS316 Flange End Y-Strainers
        • JIS 10K SS316 Flange End Y-Strainers
        • Threaded End SS316 Y-Strainers
        • ANSI 150# Cast Steel Flange End Y-Strainers
        • JIS 10K Cast Steel Flange End Y-Strainers
      • Gate Valves >
        • ANSI 150# SS316 Flange End Gate Valve
        • JIS 10K SS316 Flange End Gate Valve
        • Threaded End SS316 Gate Valve 200PSI
        • Threaded End SS316 Gate Valve 800PSI
        • ANSI 150# Cast Iron Flange End Gate Valve
        • JIS 10K Cast Iron Flange End Gate Valve
        • ANSI 150# Cast Steel Flange End Gate Valve
        • ANSI 150# Forged Steel Flange End Gate Valve
        • Threaded End Forged Steel Gate Valve
        • Welded End Forged Steel Gate Valve
      • Globe Valves >
        • ANSI 150# SS316 Flange End Globe Valve
        • JIS 10K SS316 Flange End Globe Valve
        • Threaded End SS316 Globe Valve 200PSI
        • Threaded End SS316 Globe Valve 800PSI
        • ANSI 150# Cast Iron Flange End Globe Valve
        • JIS 10K Cast Iron Flange End Globe Valve
        • ANSI 150# Cast Steel Flange End Globe Valve
        • ANSI 150# Forged Steel Flange End Globe Valve
        • Threaded End Forged Steel Globe Valve
        • Welded End Forged Steel Globe Valve
      • Butterfly Valves >
        • ANSI 150# Cast Iron Wafer Type Butterfly Valve
        • ANSI 150# Cast Iron Lug Type Butterfly Valve
    • Low Pressure Fittings >
      • Class 150# Fittings
      • Camlock Fittings
    • Accessories >
      • Stauff Pressure Gauges
      • Stauff Test Couplings
      • Stauff Tube Cleaning Systems
      • Stauff Level Gauges
      • Stauff Filler Breathers
      • Eaton Walterscheid Walform Machine
      • Eaton Walterscheid Anti Bloc Fett/Grease
      • Eaton Walterscheid Walform Seal
      • GS Hydro Retain Ring
      • GS Hydro Bonded Seals
      • O-Rings
      • Dowty Seals
  • MyRewards
    • BENEFITS
    • MyFAQ
    • Sign-up MyRewards
  • Catalogues
    • Pipes and Tubes
    • Clamps
    • Flanges
    • High Pressure Valves
    • High Pressure Fittings
    • Low Pressure Valves
    • Low Pressure Fittings
    • Accessories
  • News
  • Contact