THREADED END SS316 GATE VALVE 200 PSI
- GATE VALVES -
|
Description:
Threaded End SS316 Gate Valves 200 PSI are made in accordance with ASME B16.34/API 602 standard for low pressure application. It is designed with a wheel shape handle and come with metal to metal seat sealing characteristics. The gate valve consists of a closure element, called a disc which is allowed user to permit and prevent the flow of a process fluids. Gate valve is available in steel or stainless steel material. |
Brand:
|
|
Having difficulties looking for Threaded End SS316 Gate Valve 200 PSI? We can help you because we have all sizes.
|
Related Product of Gate Valves
Product Information of Threaded End SS316 Gate Valve 200 PSI
1. Specifications:
Gate valve is a valve that used to allow fluids flow through or stop the fluids from flow through the valve. This can be operate by lift up or lift down the disc. It is design and manufacture according to ASME B16.34/API 602 standard. It also went through the inspection and testing according to API 598.
Gate valve is a valve that used to allow fluids flow through or stop the fluids from flow through the valve. This can be operate by lift up or lift down the disc. It is design and manufacture according to ASME B16.34/API 602 standard. It also went through the inspection and testing according to API 598.
Threaded End SS316 Gate valve 200 PSI
|
2. Material and Design:
Threaded End SS316 Gate valve 200 PSI is available in stainless steel SS316 material. For stainless steel SS316 material, there are 2 available design which is screw-in bonnet type and bolted bonnet type. For screw-in bonnet type design, a bonnet is screw into the valve body to hold the internal parts that put into valve body, thus offering a pressure tight seal between bonnet and valve body. Bolted bonnet design is come with thicker cover that required bolts and nuts to tighten with valve body. This design is normally used for high pressure application. The handle of both design is design to wheel shape handle. Gate valve also can be available in 2 design, rising stem design and non-rising stem design. For rising stem design, the stem will rise when the wheel handle is rotate to open position and lower when the wheel handle is rotate to close position. By looking at the amount of stem exposed, we can easily tell that if the valve is in open position or close position. However for non-rising stem design, the valve is in open position when the handle is rotate to the open position as far as possible and in closed position when the handle is rotate to close position as far as possible. Non-rising stem design gate valve is suitable to install on hydraulic systems that have limited space for the stem to raise in full, for example, underground pipe systems. |
3. Connection Type:
For SS316 gate valve, it is only available in NPT (National Pipe Thread) female thread or BSPP (British Standard Pipe Parallel) female thread. For female thread gate valve, it need a male thread of same connection end to screw in to gate valve.
For SS316 gate valve, it is only available in NPT (National Pipe Thread) female thread or BSPP (British Standard Pipe Parallel) female thread. For female thread gate valve, it need a male thread of same connection end to screw in to gate valve.
4. Threaded End SS316 Gate Valve 200PSI Drawing and Material List:
Threaded End SS316 Gate Valve 200PSI Drawing
|
|
5. Main Technical Parameter:
Norminal Pressure |
200PSI |
Shell Test Pressure |
2.1 MPa |
Seal Test |
1.6 MPa |
Back Seal Test |
0.6 MPa |
Max Working Temperature |
-29°C to 150°C |
6. Technical Specifications:
1. Basic design and manufacture according to ASME B16.34
2. Inspection and test for according to API 598
3. Connection screw for the valve according to ASME B1.20.1, BS2779
1. Basic design and manufacture according to ASME B16.34
2. Inspection and test for according to API 598
3. Connection screw for the valve according to ASME B1.20.1, BS2779
|
Product Catalogue in pdf:
|
|
FAQ Of Threaded End SS316 Gate Valves 200 PSI
What is the size range of threaded end SS316 gate valves?
The size range of the Threaded End SS316 Gate Valves is from 1/2 inches to 2 inches.
What are the types of threaded end SS316 gate valves?
Threaded end SS316 gate valves is 200 PSI.
What is threaded end SS316 gate valves made of?
It is made of stainless steel SS316.
What is the working pressure of threaded end SS316 gate valves?
The working pressure that threaded end SS316 gate valves can withstand is up to 200 psi or 800 psi while threaded end forged steel gate valves can withstand 800 psi.
What are the types of connections for threaded end SS316 gate valves?
BSPP and NPT.
What is the function of threaded end SS316 gate valves?
The function of Threaded End SS316 Gate Valves is to use a gate or wedge type disc to restrict the flow of fluids in a piping system.
Clients who viewed this product also:
