Threaded SAE Flanges
Having difficulties looking for Threaded SAE flanges? We can help you because we have all sizes.
To further understand more about Threaded SAE flanges, please see the information provided below:
SUBSCRIBE TO CHUAN KOK EMAIL
If you are interested in our products, please get in touch - we are ready to help you. |
Description:
Threaded SAE flanges are hydraulic flange that forged according to SAE J518 / ISO 6162 standards. SAE flanges are commonly used in oil hydraulic systems. There are 2 categories of SAE flanges which are SAE Code 61 series or SAE Code 62 series. Code 61 series SAE flanges can withstand up to 3000 PSI working pressure, depending on sizes. While for code 62 series, it can withstand up to 6000 PSI working pressure. SAE Flanges are available in three types of configuration which is an o-ring side, flat side, or a complete set, depending on the oil hydraulic system requirements. For a complete set, it is configured with o-ring side, flat side, metric cap screws, washers, and NBR O-ring. The material that used to forge SAE flanges can be steel ST52.3 or stainless steel SS316L. The connection type will be available in threaded connection, either NPT (National Pipe Thread) or BSPP (British Standard Pipe Parallel). Features:
|
Watch our video here:
SAE Flange Aseembly Procedure
|
Our Brand:
Clients who viewed this product also viewed:
Threaded SAE Flange Product Information

Specifications:
Threaded SAE flange is a SAE flange that made in accordance to SAE J518 / ISO 6162 standards. SAE flanges are commonly supplied for oil hydraulic systems in sector such as oil and gas, industrial hydraulics, and mobile hydraulics. For more information about the acronym SAE, please refer to en.wikipedia.org/wiki/SAE_International
Material:
SAE Flanges are manufactured from two kinds of material, respectively steel ST52.3 or stainless steel AISI SS316L. The SAE flange body is made from normalized forgings so that it can be used for high pressure applications. There are two kind of surface for SAE flange which is rough surface and smooth surface. The rough surface is on the pipe end connection side, while the smooth surface is at flange to flange side.
Threaded SAE flange is a SAE flange that made in accordance to SAE J518 / ISO 6162 standards. SAE flanges are commonly supplied for oil hydraulic systems in sector such as oil and gas, industrial hydraulics, and mobile hydraulics. For more information about the acronym SAE, please refer to en.wikipedia.org/wiki/SAE_International
Material:
SAE Flanges are manufactured from two kinds of material, respectively steel ST52.3 or stainless steel AISI SS316L. The SAE flange body is made from normalized forgings so that it can be used for high pressure applications. There are two kind of surface for SAE flange which is rough surface and smooth surface. The rough surface is on the pipe end connection side, while the smooth surface is at flange to flange side.

Size Range:
For Code 61 series, SAE flanges are available in nominal size ranged from 3/8"NB (DN10) to 5"NB (DN125). While for Code 62 series, SAE flanges size are available from 3/8"NB (DN10) to 3"NB (DN80).
Pressure Rating:
Code 61 series and code 62 series represent different working pressure that each series can withstand. The maximum working pressure that Code 61 series can withstand are ranged from 34 Bar to 345 Bar, depends on the sizes. The bigger size of code 61 SAE flange, the lower working pressure that it can withstand. For Code 62 series, it can withstand up to 414 Bar working pressure.
However, the pressure rating of SAE flanges and connected equipment combination might vary from each other. For example: if a pipe connected to the flange has a lower maximum working pressure, it will result in an overall lower working pressure of the system. Therefore in a system, the item with the lowest pressure will be the maximum working pressure of the system.
For Code 61 series, SAE flanges are available in nominal size ranged from 3/8"NB (DN10) to 5"NB (DN125). While for Code 62 series, SAE flanges size are available from 3/8"NB (DN10) to 3"NB (DN80).
Pressure Rating:
Code 61 series and code 62 series represent different working pressure that each series can withstand. The maximum working pressure that Code 61 series can withstand are ranged from 34 Bar to 345 Bar, depends on the sizes. The bigger size of code 61 SAE flange, the lower working pressure that it can withstand. For Code 62 series, it can withstand up to 414 Bar working pressure.
However, the pressure rating of SAE flanges and connected equipment combination might vary from each other. For example: if a pipe connected to the flange has a lower maximum working pressure, it will result in an overall lower working pressure of the system. Therefore in a system, the item with the lowest pressure will be the maximum working pressure of the system.

Connections Type & Configurations:
For the connections of SAE flanges, it is available in threaded connection, either NPT or BSPP.
SAE flanges are available in two types: Flat Side and O-ring Side. Flat side of SAE flange are SAE flange that come with bolt thread (UNC / Metric) and o-ring side of SAE flange are SAE flange that contains a groove seat to place a rubber o-ring. Flanges with o-ring are has an advantage of prevent leakage as all metal-to-metal flanges are more prone to leakage.
There are 3 configurations of SAE flanges which is flat side, o-ring side or complete set. A complete set of SAE flanges are combination of flat side and o-ring side where it forms a seal between the flat surface and o-ring held in a recessed circular groove in the other half. By tightening the allan cap screws in diagonal sequence, it draws flat side and o-ring side together and compresses the o-ring.
SAE flange complete set is tightened by using socket head cap screws and spring washers according to the recommended torque value. According to SAE J518 standard, the lengths of cap screws are usually shorter than the overall length of SAE flange complete set.
For the connections of SAE flanges, it is available in threaded connection, either NPT or BSPP.
SAE flanges are available in two types: Flat Side and O-ring Side. Flat side of SAE flange are SAE flange that come with bolt thread (UNC / Metric) and o-ring side of SAE flange are SAE flange that contains a groove seat to place a rubber o-ring. Flanges with o-ring are has an advantage of prevent leakage as all metal-to-metal flanges are more prone to leakage.
There are 3 configurations of SAE flanges which is flat side, o-ring side or complete set. A complete set of SAE flanges are combination of flat side and o-ring side where it forms a seal between the flat surface and o-ring held in a recessed circular groove in the other half. By tightening the allan cap screws in diagonal sequence, it draws flat side and o-ring side together and compresses the o-ring.
SAE flange complete set is tightened by using socket head cap screws and spring washers according to the recommended torque value. According to SAE J518 standard, the lengths of cap screws are usually shorter than the overall length of SAE flange complete set.
How to assemble SAE Flanges
|
SAE Flanges are used for high pressure hydraulic applications. In order to use and assemble SAE Flanges safely, it is important to know the right procedures and torque range for assembly.
Because of the high pressure, it is important to note that every hydraulic or pneumatic system requires some form of fitting installation for completion. Proper fabrication and installation are essential for leak free performance, the overall efficiency , and general appearance of any system. Do watch our youtube video and our instructions below carefully! |
Assembly of SAE Flanges:
Below are the instructions for assembly of SAE Flanges.
3000 PSI Series (Code 61) Flange Recommended Screw Torque Table
Metric Size |
Flange Size |
Screw Thread |
Screw Torque (NM) |
13 |
1/2" |
M8 |
32 |
19 |
3/4" |
M10 |
70 |
25 |
1" |
M10 |
70 |
32 |
1 1/4" |
M10 |
70 |
38 |
1 1/2" |
M12 |
130 |
51 |
2" |
M12 |
130 |
64 |
2 1/2" |
M12 |
130 |
76 |
3" |
M16 |
295 |
89 |
3 1/2" |
M16 |
295 |
102 |
4" |
M16 |
295 |
127 |
5" |
M16 |
295 |
6000 PSI Series (Code 62) Flange Recommended Screw Torque Table
Metric Size |
Flange Size |
Screw Thread |
Screw Torque (NM) |
13 |
1/2" |
M8 |
32 |
19 |
3/4" |
M10 |
60 |
25 |
1" |
M12 |
60 |
32 |
1 1/4" |
M12 |
92 |
38 |
1 1/2" |
M16 |
150 |
51 |
2" |
M20 |
150 |
64 |
2 1/2" |
M24 |
150 |
75 |
3" |
M30 |
295 |
* Tolerance: max. 10%, min. 0%