Chuan Kok
  • Home
  • About
    • ISO Certification
    • Testimonials
    • Careers
  • Brands
    • Addison Fluids
    • Bothwell
    • Lame
    • Eaton Walterscheid
    • Nibco
    • Inteva
    • KPL Industry
    • Oleo-Tecnica
    • MHA-Zentgraf
    • Reliable Fluid Systems
    • Stauff
  • Products
    • Fittings and Valves - High Pressure Range
    • Fittings and Valves - Low Pressure Range
    • Flanges
    • Pipe Clamps
    • Pipes and Tubes
    • Accessories
  • NEWS
  • MyRewards
    • MyBenefits
    • MyFAQ
    • Sign-up MyRewards
  • Contact

SAE Flanges

​SUBSCRIBE TO CHUAN KOK EMAIL
If you are interested in our products, please get in touch - we are ready to help you.
Description:
Oleo Tecnica SAE flanges are made per SAE J518 / ISO 6162 standards. SAE flanges are used in oil hydraulic systems. SAE flanges are also known as SAE Code 61 Flanges or SAE Code 62 Flanges. Code 61 represents 3000 PSI working pressure, while Code 62 represents 6000 PSI working pressure.

SAE Flanges are available with an o-ring side, flat side, or a complete set, depending on the hydraulic system requirements. The materials used to fabricate SAE flanges are steel and stainless steel. There are four common types of connection for SAE flanges: socket weld, butt weld, NPT, and BSPP.
Features:
  • Size Range: 1/4" to 5"
  • Design Standard: SAE J518 / ISO 6162
  • Connections: Socket Weld / Butt Weld / NPT / BSPP
  • Material: Steel ST52.3 / AISI SS316L
  • Working Pressure: Up to 210 Bar / 420 Bar
  • Brand: Oleo Tecnica
  • Origin: Italy​ ​

For more information on different connection types of SAE Flange, please refer to the link below:
1. Socket Weld SAE Flange
2. Butt Weld SAE Flange
3. Threaded SAE Flange

Watch our video here:
SAE Flange Aseembly Procedure
​Why Choose Chuan Kok
Chuan Kok Proven Process
Loyalty Reward

Our Brand:
Oleo Tecnica

Clients who viewed this product also viewed:
SAE Flange Ball Valves
SAE Flange Ball Valves
SAE Flange Check Valves
SAE Flange Check Valves
Stainless Steel Pipes
Stainless Steel Pipes
Pipe Clamps
Pipe Clamps

SAE Flange Product Information

SAE FlangesSAE Flanges
Specifications:
SAE flange is a hydraulic flange made in accordance with SAE J518 / ISO 6162 standards. SAE flanges are normally supplied for oil hydraulic systems in extensive range such as mining, shipbuilding, mobile hydraulic systems and oil & gas. For more information about the acrynom SAE, please refer to en.wikipedia.org/wiki/SAE_International

Material:
SAE Flanges are manufactured from two kinds of material, steel ST52.3 and stainless steel AISI SS316L. In order for SAE flange to be able to be used for high pressure applications, the SAE flange bodies have to be made from normalized forgings.

Oring Side SAE FlangeOring Side SAE Flange
Size Range:
SAE flange are available in nominal sizes ranged from 3/8"NB (DN10) to 5"NB (DN125). The pressure rating of SAE flange can be defined to two series: Code 61 Series and Code 62 Series.
​

Pressure Rating:
The maximum working pressure for Code 61 series are ranged from 34 Bar to 345 Bar, depends on the sizes. For Code 62 series, the maximum working pressure are 414 Bar.

However, the pressure rating of SAE flanges and connected equipment combination might vary from each other. For example: if a pipe connected to the flange has a lower maximum working pressure, it will result in an overall lower working pressure of the system. Therefore in a system, the item with the lowest pressure will be the maximum working pressure of the system.

Flat Side SAE FlangeFlat Side SAE Flange
Connections Type & Configurations:
For the connections of SAE flanges, it usually available in few types: threaded (NPT / BSPP), welding (Socket Weld / Butt Weld), blind flanges, and split flanges.

SAE flanges are available in two types: Flat Side and Oring Side. Flat side of SAE flange are SAE flange that come with bolt thread (UNC / Metric) and oring side of SAE flange are SAE flange that contains a groove seat to place a rubber o-ring. Flanges with oring are has an advantage of prevent leakage as all metal-to-metal flanges are more prone to leakage.


The configurations of SAE flanges are flat side, oring side or complete set. A complete set of SAE flanges are combination of flat side and oring side where it forms a seal between the flat surface and oring held in a recessed circular groove in the other half. By tightening the bolts, it draws flat side and oring side together and compresses the oring.
​
SAE flange complete set is tightened by using socket head cap screws and spring washers according to the recommended torque value. According to SAE J518 standard, the lengths of cap screws are usually shorter than the overall length of SAE flange complete set.


​How to assemble SAE Flanges

​SAE Flanges are used for high pressure hydraulic applications. In order to use and assemble SAE Flanges safely, it is important to know the right procedures and torque range for assembly. 

Because of the high pressure, it is important to note that every hydraulic or pneumatic system requires some form of fitting installation for completion. Proper fabrication and installation are essential for leak free performance, the overall efficiency , and general appearance of any system. Do watch our youtube video and our instructions below carefully!

​Assembly of SAE Flanges:

Below are the instructions for assembly of SAE Flanges.
​
STEP 1
Lubricating SAE Flange
  • Ensure the sealed surface are free from scratches and contamination.
  • Lubricate with system fluid or any compatible lubricant on the surface of O-ring portion
STEP 2
Threading SAE Flange
  • Position the flange.
  • Place the washer on cap screws and bolt through the bolt holes.​

​
STEP 3
SAE Flange Torque Instructions
  • Tighten the cap screws by hand.
  • Torque the cap screws gradually in diagonal sequence till the appropriate torque level based on below torque table.
STEP 4
SAE Flange Tightening Instructions
  • Tighten the cap screws according to the below torque table.

3000 PSI Series (Code 61) Flange Recommended Screw Torque Table
Metric Size
Flange Size
Screw Thread
Screw Torque (NM)
13
1/2"
M8
32
19
3/4"
M10
70
25
1"
M10
70
32
1 1/4"
M10
70
38
1 1/2"
M12
130
51
2"
M12
130
64
2 1/2"
M12
130
76
3"
M16
295
89
3 1/2"
M16
295
102
4"
M16
295
127
5"
M16
295
6000 PSI Series (Code 62) Flange Recommended Screw Torque Table
Metric Size
Flange Size
Screw Thread
Screw Torque (NM)
13
1/2"
M8
32
19
3/4"
M10
60
25
1"
M12
60
32
1 1/4"
M12
92
38
1 1/2"
M16
150
51
2"
M20
150
64
2 1/2"
M24
150
75
3"
M30
295
​* Tolerance: max. 10%, min. 0%

Catalogue available in pdf:
SAE Flanges
SAE Flanges Full Catalogue
S/W SAE Flanges
S/W SAE Flanges
B/W SAE Flanges
B/W SAE Flanges
BSP SAE Flanges
BSP SAE Flanges
B/W Cetop Flanges
B/W Cetop Flanges
Picture
NPT SAE Flanges
Split SAE Flanges
Split SAE Flanges
Cetop Flanges
Cetop Flanges
ISO6164 Square Flanges
ISO6164 Square Flanges

Product Literature
in pdf :
SAE Flange Literature
SAE Flange Literature
How to Assemble
​SAE Flanges in pdf: 
SAE Flange Assembly Instruction Catalogue
SAE Flange Assembly Instruction Catalogue

This is the background of the Bottom Area shown below. It'll display correctly on published site.
If you don't want background for the bottom area, simply hover over the bottom of this image to delete it. The background of the bottom area will be a solid dark color.

Help
Need Help?
​info@chuankok.com

Call Us
Call Us​
​+65 6294 2566

Visit Us
Warehouse
​
1783 Geylang Bahru #01-02

Chuan Kok
About Us
ISO Certification
Testimonials
Careers
Online Community​
Facebook
Google Plus
Youtube
Twitter
​Quick Links
Contact Us
Terms & Conditions
Privacy Policy
Site Map
Join our mailing list!
GET STARTED
 
© 2020 Chuan Kok Hardware & Machinery Pte Ltd. All rights reserved.