ANSI 150# Flange End Gate Valve

Having difficulties looking for ANSI 150# Flange End Gate Valves? We can help you because we have all sizes.

To further understand more about ANSI 150# Flange End Gate Valves, please see the information provided below:

Description:
ANSI 150# flange end gate valves are made in accordance with various standard for low pressure application that up to 150 PSI working pressure. It is designed with a wheel shape handle and the metal to metal seat sealing characteristics. The flange end gate valve consists of a closure element, called a wedge or disc which is allowed to permit and prevent the flow of a process fluids to flow through the valve body.

Features:

Connection: ANSI 150# Flange End Connection
Design and Manufacture Standard: ASME B16.10/API 600/API 602
Size: 1” to 6”
Working Pressure: 150 PSI
Valve Body Material: Stainless Steel SS316, Cast Iron, Cast Steel, A105
Applicable Medium: General oil, Gas & Water applications
Temperature Range:
- SS316: ≤425°C
- Cast Iron: ≤205°C
- Cast Steel: ≤425°C
- A105: -29°C to 425°C

For enquiries regarding ANSI 150# flange end gate valves, please contact us. Please be assured that we will attend to your enquires as soon as possible.

Watch our video here:

Why Choose Chuan Kok

Chuan Kok Proven Process

Loyalty Reward

Clients who viewed this product also viewed:

Low Pressure Threaded Fittings

Low Pressure Ball Valves

Threaded Gate Valves

Stainless Steel Pipes

150# Flange End Gate Valve Product Information

2" ANSI 150# SS316 Gate Valve

Specifications:
Gate valve is valve that installed on hydraulic systems to allow or cut off the fluids flow through the valve passage. The wedge can be lift up or lift down by rotate the wheel handle according to the direction of "open" and "close" which mark on handle. It is design and manufacture according to various standard such as ASME B16.10, API 600, and API 602. It will be inspected and tested according to API 598.

Material and Design:
ANSI 150# flange end gate valve is available in several materials such as forged steel A105, stainless steel SS316, cast iron A126B, and cast steel WCB. The materials can be select accordingly by refer to the system requirement. For ANSI 150# gate valve, the cover is design in bolted bonnet type where bolts and nuts are used to tighten the cover with the valve body.

The stem which is one component part of gate valve, is available in rising stem design and non-rising stem design. For rising stem design, it mean that the stem will rise when the handle is rotate to open position and descend when the handle is rotate to close position. This design tell us if the valve is in open position or closed position by looking at the amount of stem exposed. Alternatively for non-rising stem design, the valve is fully open when the handle is rotate to open position as far as possible and fully close when the handle is rotate to close position as far as possible. Non-rising stem design gate valve is suitable to install on tight places where there is not enough space for the stem to raise, for example, underground pipe systems.

Do check with us for the availability of gate valve design.

2" ANSI 150# Cast Steel Gate Valve

Size and Pressure Rating:
The available size for ANSI 150# gate valve is ranged from 1" to 6", subject to type of material. ANSI 150# gate valve can withstand up to 150 PSI working pressure.

Connection Type:
For ANSI 150# series flange end gate valve, the another connection end need to be in ANSI 150# flange connection as well. The number of bolt hole is depend on the valve size. For example, for valve size that below 4", there are only 4 bolt hole on the flange. While for valve size that above 4", there are 8 bolt hole on the flange. Bolts, nuts, and gasket are required whenever there are any flange to flange connection.

Catalogue available in pdf: